Ice-strenghtened, single decked, single screw motor ship with double bottom and double skin with coated cargo tanks. No steel structure facing into the cargo tanks. The hull form is designed for minimum resistance, overall design provides an environmentally friendly, cost-effective, reliable and flexible unit. One deep-well pump for each tank and complete segregation for each cargo tank, one vapour return line.
DESIGNER
DELTA MARINE ENGINEERING AND COMPUTER TRADE Co.
PROJECT NO
DLT - 049
PROJECT NAME
FS ODIN (3500 DWT OIL/CHEMICAL TANKER )
OWNER
EGM GENOA / ITALY
SHIPYARD
DEARSAN SHIPYARD / ISTANBUL
HULL NUMBER
20
CLASSIFICATION SOCIETY
BUREAU VERITAS
CLASS ID
04278C
CLASS NOTATION
BV, I 3/3 E + OIL TANKER/CHEMICAL TANKER, ESP, UNRESTRICTED NAVIGATION, + AUT-UMS, ICE CLASS IC, MONSHAFT, CLEAN SEA
STATUS
IN SERVICE
DELIVERY DATE
2005
PORT OF REGISTRY
GENOVA
CALL SIGN
IBXI
FLAG
ITALY
IMO NUMBER
9297149
SHIP GENERAL
MAIN DIMENSIONS
LENGTH OVERALL
92.86 m
LENGTH BETWEEN PERPENDICULARS
86.65 m
BREADTH (MOULDED)
14.10 m
DEPTH (MOULDED)
7.20 m
DRAUGHT (DESIGN)
5.70 m
TONNAGE
DEADWEIGHT (at design draught)
3471tons
GROSS TONNAGE
2579 GRT
NET TONNAGE
1138 NRT
CAPACITIES
LIQUID CARGO
4176 m³
WATER BALLAST
1432 m³
HFO
186 m³
MDO
29 m³
LO
12 m³
FEED WATER
3 m³
SEWAGE
1.4 m³
FRESH WATER
61 m³
CLEANING WATER
123 m³
SPEED, CONSUMPTION & CRUISING RANGE
DESIGN SPEED
13.0 knots, 85% MCR
CONSUMPTION
7.5 ton/day, 85% MCR
CRUISING RANGE
7200 nm
HULL
HULL MATERIALS
The vessel to be constructed throughout of steel-plates and sections of approved shipbuilding quality, tested and approved by the Classification Society. In general, continuous and scallop welding to be adapted. Intermittent welds may be adopted where allowed by the Classification Society.
EQUIPMENT FOR CARGO
CARGO SPACE DEFINITION
TYPE OF CARGO SPACES
Epoxy coated cargo tanks integrated in the structure separated by longitudinal and transverse corrugated bulkheads and independent slop tanks on deck
NUMBER OF CARGO COMPARTMENT
10 Cargo Tanks + 2 Independent Slop Tanks
MAX CARGO DENSITY
1.54 t/m³
DECK CRANES FOR CARGO
GURDESAN, Cargo Hose Crane, SWL 5t, 12 m / Provision Crane, SWL 2t, 7 m
CARGO SYSTEM
Cargo system is designed so that 11 different substances can be loaded/ unloaded at the same time. Also a unique substance can be loaded / unloaded to /from all tanks by means of the two common line located aft and fore of cargo manifold.
Cargo discharge system of the ship is capable of discharging six (6) tanks at the same time in full capacitiy.
CARGO DISCHARGE CAPACITY
Cargo discharge system of the ship is capable of discharging six (6) tanks at the same time in full capacitiy.
CARGO PUMPS
MARFLEX, 10 x 150 m³/h, 100mlc, 1 cSt / 1 x 80 m³/h
CARGO PIPES & FITTINGS
Cargo pipes are class II type mild steel pipe. The connections to be of butt welded if possible. The pipelines to be of through cargo tank inside. The pipelines to be arranged with sufficient expansion possibilities.
CARGO SYSTEM VALVES
DANFOSS, Remote Operated Hydraulic Valves
SEPARATE STRIPPING SYSTEM
There are two kinds of stripping procedures applying for this vessel. Cargo tanks 6P&S, 5P&S,4P&S which are located aft of the manifold and cargo tanks 3P&S, 2P&S, SLOP which are at fore of the manifold. Stripping is done by using compressed air or nitrogen when substances can not face to contact the air ie oxygen. DN 25 x Sch 10s stainless steel seamless 316L 1.4404 for stripping pipes are used in stripping system.
FREEZING, REFRIGERATING & HEATING SYSTEM FOR CARGO
Stainless steel heating coils
INERT GAS SYSTEM
Nitrogen system is designed so that to fill 95% ullage volume of all cargo tanks and slop tank at the same time. Nitrogen main pipes are connected to each tank cargo access hatch by means of the flexible hoses. System contain 10 pieces 50 lt, 200 bar nitrogen tube, control cabinet (include reducer, safety, non return valves.), flexible hoses. The cargo tank inlet pressure of nitrogen gas is 0.13 bar. Nitrogen tubes control cabinet and flexible hoses will be keep in Nitrogen room located main deck above the pump room .System is also used for stripping and purging purpose as well.
CARGO VENTILATION SYSTEM
PV valves setting pressure is 2000 mmWG for pressure, -350 mmWG for vacum. The lines between PV valves and tanks are so arranged as to permit their self draining to the tanks.Pipe connections are to be full penetration butt welded type.
TANK CLEANING SYSTEM
Each cargo tank to be fitted with two tank cleaning hatches for tank portable tank cleaning machines. Tank cleaning hatches also to be used for ventilation gas freeing fans. Tank cleaning pump to be centrifugal, electric driven capacity 40 m³/h, 10 bar.
More Information
Photos
